JLG 1230ES Push-Around Vertical Mast Lift
Twelve feet of quiet reach. The compact AWP for stockrooms, retail, and tight overhead work.
JLG 1230ES push-around vertical mast lift. 12-ft platform height, 350 lb capacity, 24V DC battery-electric, 1,072-lb unit weight. Full platform cage, indoor-rated.
- 12 ft platform height (18 ft working height)
- 350 lb single-person capacity
- Battery-electric 24V DC lift — zero emissions, quiet operation
- Four locking outrigger legs for stable base on level floors
- 1,072 lb unit weight — freight elevator and pallet jack compatible
- Full-cage platform with self-closing entry gate
- Controlled-descent emergency override
- Ground and platform emergency stop controls
✓ In Stock — Ships in 5-10 business days
Request a Quote
We respond within 24 hours — pricing, availability & shipping included
Quote Request Received
Thanks! We'll get back to you within 24 hours with pricing, availability, and shipping details for the JLG 1230ES Push-Around Vertical Mast Lift.
| Drive | Manual push (no drive motor) |
| Model | 1230ES |
| Lift Power | 24V DC battery-electric |
| Outriggers | Four locking pad legs |
| Manufacturer | JLG Industries |
| Overall Width | 30 inches (0.76 m) |
| Platform Size | 24" × 36" (0.61 m × 0.91 m) |
| Certifications | ANSI/SAIA A92.3, CE EN 1570-1, CSA B354 |
| Machine Weight | 1,072 lbs (486 kg) |
| Working Height | 18 ft (5.49 m) |
| Platform Height | 12 ft (3.66 m) |
| Platform Capacity | 350 lbs (159 kg) |
Multi-angle views of the JLG 1230ES Push-Around Vertical Mast Lift. Click any image to zoom.
Watch the JLG 1230ES Push-Around Vertical Mast Lift in action — full installation and operation demo.
Aerial work platforms (man lifts) use an electric-hydraulic or electric-mechanical scissor or mast system to raise an operator and their tools to height. All ground and platform controls are designed for one-person operation.
Ground Controls
All functions — drive, steer, and lift — are available from the ground control panel at the base of the unit. Use ground controls for initial positioning and for emergency lowering. Ground controls override platform controls when the key switch is set to "ground" mode.
Platform Controls
A control box mounted on the platform guard rail operates drive, steering, and lift from elevated position. The deadman switch (hold-to-run) on the lift/lower lever must be held continuously — releasing it stops all motion immediately.
Outrigger Deployment
Before raising above a defined height (typically 6 feet), the outriggers must be deployed and load indicators must confirm level ground contact. The lift will not raise above the outrigger threshold if any outrigger shows inadequate ground contact.
Emergency Lower
A manual hydraulic pump or gravity-controlled valve at the base of the unit lowers the platform in the event of power failure. The emergency lower valve is clearly labeled and accessible without tools. Familiarize all operators with its location before first use.
⚙️ Deadman / Hold-to-Run
All platform motion controls require continuous hold-to-run activation. Releasing the control lever stops all motion immediately. The deadman system means a worker losing consciousness or balance halts the machine automatically.
🔒 Tilt Interlock
An electronic inclinometer prevents lift operation beyond the rated slope. If the machine is on a slope exceeding the interlock threshold, the lift function is disabled until the machine is moved to level ground.
📏 Outrigger Interlock
The lift cannot raise above a set height until all outriggers show positive ground contact. Even a single outrigger without firm contact blocks elevation above the interlock threshold — preventing tip-over on soft or uneven ground.
🛡️ Platform Fall Protection
Full-perimeter guardrail system with mid-rail meets OSHA 1910.29 and ANSI/SAIA A92.20 requirements. A self-closing entry gate prevents the operator from exiting the platform at height. D-ring anchor points are rated for fall arrest attachment.
How does this compare?
The 1230ES is the right size when access height is 12 feet or under and floor space is limited. For facilities needing 15–20 feet, step up to the Genie GR-20 Runabout which adds self-propelled drive capability. For two-person work or heavier material loads at this height, consider the compact electric scissors (Genie GS-1930, Snorkel S3219E). The 1230ES's sub-1,100 lb weight is its key advantage for facilities with standard freight elevator weight limits.
No reviews yet
Be the first to share your experience with this product.
You Might Also Like
